Endstones
Endstones find wide use as a thrust bearing in combination with a ring jewel which serves as the annular bearing. The endstone may be mounted in the same housing with the ring jewel or mounted separately in an adjusting screw—especially when the end of the pivot extends beyond the radical bearing. Pivot ends in both cases should be highly polished. Endstones are also used as spacers or insulators.
| Filter By: | Minimum: | |
| Maximum: |
| Model | Outside Diameter | Thickness |
|---|---|---|
| E0.82 | .0331/.0335" | .0303/.0311" |
| E0.84 | .0331/.0335" | .0197/.0205" |
| E1.02 | .039/.040" | .0085/.010" |
| E1.27 | .0484/.0492" | .0087/.0102" |
| E1.40 | .0587/.0591" | .0150/.0157" |
| E1.47 | .0580/.0584" | .0330/.0370" |
| E1.58 | .0591/.0618" | .0087/.0102" |
| E1.58K | .0591/.0622" | .0177/.0197" |
| E1.60 | .061/.065" | .018/.022" |
| E2.00 | .0748/.0827" | .026/.030" |
| E2.03 | .0787/.0795" | .0382/.0402" |
| E2.08 | .0819/.0827" | .0400/.0420" |
| E2.49 | .0980/.0984" | .0190/.0205" |
| E2.72 | .1071/.1079" | .0346/.0370" |
| E3.43 | .134/.136" | .048/.052" |
| E3.86 | .153/.155" | .038/.040" |
| E4.65 | .183/.185" | .058/.060" |
| E4.76 | .188/.188" | .0332/.0352" |
| E6.30 | .247/.249" | .030/.032" |
| E7.49 | .293/.297" | .014/.016" |
| E7.87 | .308/.312" | .060/.065" |
